How to install home depot ceramic wood tile? On this occasion, we will cover the floor of a room with some porcelain stoneware tiles, whose finish imitates the oak. Its main advantage with respect to wood is that it is easily cleaned and completely waterproof. The first thing that we will have to do is calculate the m2 of the surface to be coated, in order to acquire the necessary amount of tiles. The pieces that we are going to use are thin, resistant and are fixed with cement glue. We cover the entire floor and fill the sores with a mass for joints.
Once we have verified that the ground is level, we clean the surface. We do a rethinking of the first pieces. It is convenient to place the entire home depot ceramic wood tile in the most visible area of the room, leaving the cutouts for the surface next to the door. Now we go with the cement glue. We throw the product in a bucket and pour the water, in the quantities indicated by the manufacturer. With the drill provided with a mixing rod, stir well, until a homogeneous mass is obtained.
Using a notched trowel, we apply the dough on both the floor and the tiles, place the piece and put some cross braces. We return to cement and install the second tile. In the same way, we place the rest of the pieces in the first row. Most likely we have to cut the last home depot ceramic wood tile in each row, to adapt them to the space. We mark the cutting line, place the piece on the base of the cutter and pass the knife over the mark. Then, lightly press the arm to finally break the tile.